Omron ZS Series Communication Command Reference page 35

Unit No. Data No.
03h 02h
03h 03h
03h 04h
03h 05h
03h 06h
04h 00h
04h 01h
05h 00h
07h 00h
07h 02h
07h 06h
07h 0Dh
07h 0Eh
07h 11h
07h 25h
07h 26h
07h 27h
Setting Value Obtaining and Changing Command
Setting range/
Parameter
output range
Glass thickness
0: STOP
measurement
1: Moving
mode
0: None
1: Filter size 2
Image smoothing
2: Filter size 4
level
3: Filter size 8
4: Filter size 16
Background
0 to 255 (tone)
removing level
before addition
Background
0 to 4095 (tone)
removing level after
addition
0: 0 %
1: 12.5 %
2: 25%
3: 37.5 %
Edge threshold
4: 50%
5: 62.5 %
6: 75%
7: 87.5 %
0: OFF
Mutual interference
1: ON
prevention mode
0: Timing A
Timing setting
1: Timing B
Gain setting 1 to 5
0: Auto
Emitted light amount
1: Auto range
setting (Area 1)
2: Fixed
0: Peak
Light amount 1: Surface
control target area 2: 2 areas
3: 3 areas
Emitted light
0 to 1000 (X0.1%)
amount fixed level
Emitted light
0 to 800 (X0.1%）
amount lower limit
Emitted light amount
0 to 800 (X0.1%)
upper limit
0: Surface
Measurement target
1: 2 areas
area
2: 3 areas
Received light
0 to 4095 (tone)
amount (surface)
Received light
0 to 4095 (tone)
amount (2 areas)
Received light
0 to 4095 (tone)
amount (3 areas)
CompoWay/F Communication Command Reference
Section 3
Remarks
Parameters when
[Glass material]=[FILM/
OTHERS]
Parameters when [Mutual
interference prevention
mode]=[ON]
(Note 1)
Parameters when [Emitted light
amount setting]=[Fixed]
Parameters when [Emitted light
amount setting]=[Auto range]
ZS Series
3-5