Front Key Customize Function - Icom IC-7300 Information

■ Front Key Customize function

You can change the
VOX/BK-IN
» SET > Function > Front Key Customize
MENU
Function
• Push to turn the VOX function in the Voice operation modes and
VOX/BK-IN the Break-in function in the CW mode ON or OFF.
• Hold down for 1 second to open its function menu.
In the CW mode
AUTOTUNE Push to automatically tune the operating frequency to a close-by
CW signal.
M-CH UP Push to scroll Memory CH up.
M-CH DOWN Push to scroll Memory CH down.
PRESET Push to open the PRESET screen.
In the SSB, AM, or FM mode
Voice/Keyer/
• Push to transmit the voice audio recorded on the SD card once.
RTTY Memory 1
• Hold down for 1 second to repeatedly transmit the voice audio.
L If the voice audio is not saved in the Voice TX memory (T1 ~
T4), this function is disabled.
In the CW mode
Voice/Keyer/
• Push to transmit the Keyer memory content once.
RTTY Memory 2
• Hold down for 1 second to repeatedly transmit the memory
content.
L If the Keyer memory content (M1 ~ M4) is not entered, this
Voice/Keyer/
function is disabled.
RTTY Memory 3
In the RTTY mode
Push to transmit the RTTY memory content once.
L If the RTTY memory content (RT1 ~ RT4) is not entered, this
Voice/Keyer/
function is disabled.
RTTY Memory 4
AUTO
, , , and keys function.
▲
▼
TUNE
Description
●: Default setting, ○: Assignable, N/A: Not assignable
5
[VOX/BK-IN] [AUTOTUNE]
● N/A
N/A ●
N/A N/A
N/A N/A
○ ○
○ ○
[▲] [▼]
N/A N/A
N/A N/A
● ○
○ ●
○ ○
○ ○