Error Codes - CareFusion Alaris 8600 Technical & Service Manual

Table 6-3 error Codes
If the error is repeatable, perform the response steps in the order they are listed until the error is
corrected. Refer to the PC Unit/Pump Module Service Manual for more detailed error code information.
Following repair, use the applicable maintenance software to perform the required tests.
error Code
600.7000 Message corrupted.
600.7010 Communications error.
600.7020 Interrupt error.
600.7030 General error.
600.7040 Command buffer error.
600.7050 Internal command error.
600.7060 External command error
600.7070 Internal scan not responding.
600.7080 External scan not responding.
600.7090 POST general error.
600.7100 Keypad failure.
600.7110 Software version compatibility failure.
600.7120 Internal version compatibility failure.
600.7130 External version compatibility failure.
explanation
Replace Logic Board.
1. Replace Logic Board.
2. Replace Camera Assembly (embedded scanner).
3. Replace handheld scanner.
Replace Logic Board.
1. Replace Logic Board.
2. Replace Camera Assembly (embedded scanner).
3. Replace handheld scanner.
Replace Logic Board.
1. Replace Logic Board.
2. Replace Camera Assembly (embedded scanner).
1. Replace Logic Board.
2. Replace handheld scanner).
1. Replace Camera Assembly (embedded scanner).
2. Replace Logic Board.
1. Detach Auto-ID Module from PC Unit. Disconnect
handheld scanner and reattach Auto-ID Module.
2. Replace Internal Cable.
3. Replace Logic Board.
Replace Logic Board.
Replace Front Case Assembly.
1. Reflash Auto-ID Module.
2. Replace Logic Board.
Return to factory.
Return to factory.
Troubleshooting
response
Alaris Auto-ID Module
®
Technical Service Manual
6-5