Camera/Frame/Board Assembly - CareFusion Alaris 8600 Technical & Service Manual

5.2 dISaSSeMBly/reaSSeMBly (Continued)

5.2.4 Camera/Frame/Board assembly

1. Remove nut attaching keypad ground
wire to IUI Bracket.
2. Disconnect from Logic Board:
• Internal Cable -
• LED Harness -
• Keypad Cable -
3. Remove screws (
Frame/IUI Bracket to Front Case.
J5
J6
J11
) attaching Internal
4
LED Harness
Internal Cable
Keypad Ground Wire
Corrective Maintenance
during reassembly:
• When reattaching keypad ground wire,
route wire to avoid pinching.
• When reconnecting cables to Logic
Board, use an orange stick or similar tool
to ensure cables are securely seated into
connectors.
Keypad Cable
Alaris
Technical Service Manual
5-7
Auto-ID Module
®