Latch Assembly And Feet - CareFusion Alaris 8600 Technical & Service Manual

5.2 dISaSSeMBly/reaSSeMBly (Continued)
5.2.1

latch assembly and Feet

1. Remove screws (
Assembly to bottom of Rear Case.
2. Remove Latch Assembly components
from bottom of Rear Case. Pay close
attention to Compression Spring
location to ensure proper installation
during reassembly.
3. Pull Feet (
2
) attaching Latch
2
) from underside of module.
Leaf Spring
Compression Spring
Corrective Maintenance
during reassembly:
Apply thin layer of silicone grease to Feet
before insertion. Feet press-fit into module.
Latch Support
Latch
Foot (2 PL)
Alaris
Technical Service Manual
5-3
Auto-ID Module
®