Installation - Silver King SK-2 Operation Manual

Cream Dispenser
Model SK-2
To avoid injury, it is recommended that the
unit be moved by two people
Locate the Unit. Move the unit to its mounting
1
location.
Install the four legs underneath the unit. The dis-
2
penser is shipped without legs attached. To install,
carefully tilt the unit and thread the legs into the
four corner holes on the bottom of the dispenser.
Level the Unit. In order for the unit to function
3
properly, level the unit front to back and side to side.
Adjust the lower portion of the legs to level the unit.
Install the drip tray and drip tray cover
4
SK-2 Cream Dispenser
WARNING
Drip Tray
Cover
Drip Tray

Installation

Connect the unit to power. Plug in the power cord
5
on the back of the unit, at the left rear. Run the cord
along the rear of the shelf and plug it into the designat-
ed outlet.
The power cord comes with a 3-prong plug for grounding pur-
poses. Any attempt to cut off this grounding spike or to connect
to an ungrounded adapter plug could result in serious injury,
will void the warranty and terminates the manufacturer's
responsibility.
After installation and before the unit goes into service, it
must be cleaned and sanitized.
5
WARNING
IMPORTANT