Installation - Silver King SK2SB Technical Manual And Replacement Parts List

Lettuce crisper/dispenser
Table of Contents

Advertisement

Available languages

Available languages

Thank you for purchasing Silver King food service equipment. Our goal is to provide our customers with the most reliable
equipment in the industry today. Please read this manual and the accompanying warranty information before operating your new
Silver King unit. Be sure to complete and mail the warranty card within 10 days of purchase to validate your warranty.
UNCRATE AND INSPECT FOR DAMAGE
Upon delivery of your new Silver King unit, uncrate at once to inspect for possible freight damage following the instructions printed
on the exterior of the container. Report any damages to the carrier responsible for transportation and promptly present a claim for
any evidence of mishandling.

INSTALLATION

The stainless steel exterior of the cabinet has been protected by a plastic covering during manufacturing and shipping. This
covering can be readily stripped before installation. After removing the covering, wash the interior and exterior surfaces, including
the bin, using a warm, mild soapy water solution and a sponge or cloth.
Location:
When locating your new Silver King Lettuce Dispenser, convenience and accessibility are important considerations, but the
following installation guidelines must be observed:
• When placing the unit on a counter, the counter must be able to support a minimum of 200 pounds.
• When wall mounting the unit, follow the instructions supplied.
• Correct serving height is important so that those using the dispenser can reach the contents easily.
• The unit must be level or tilted backwards slightly.
• Avoid placing the unit next to an oven, heating element or hot air source that would adversely affect
the performance of the unit.
• The unit requires a minimum of six (6) inches clearance on each side for proper airflow to the
compressor area.
Electrical Connections:
Be sure to check the data plate, located on the liner of the cabinet, for required voltage prior to connecting the unit to power. The
specifications on the data plate supersede any future discussion.
The standard Lettuce Dispenser is equipped with an eight (8) foot Power Cord that requires a 115 Volt, 60 Cycle, 1 Phase properly
grounded electrical receptacle. The Power Cord comes with a 3 prong plug for grounding purposes. Any attempt to cut off the
grounding spike or to connect to an ungrounded adapter plug will void the warranty, terminate the manufacturers responsibility and
could result in serious injury.
The circuit must be protected with a 15 or 20 amp fuse or breaker. The use of extension cords is not recommended with this unit.
TECHNICAL MANUAL
SILVER KING MODEL SK2SB LETTUCE DISPENSER
1

Advertisement

Table of Contents
loading

Table of Contents