Changing Lan Ipv4 Address - D-Link DAP-300P Quick Installation Manual

Wireless n300 poe access point / router

Hide thumbs Also See for DAP-300P:

Table of Contents

DAP-300P

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater, and

Client modes.

1. Select the Automatic obtainment of IPv4 address to let the device

automatically obtain the LAN IPv4 address.

If you want to manually assign the LAN IPv4 address for DAP-300P, do not

select the Automatic obtainment of IPv4 address checkbox and fill in

the IP address, Subnet mask, Hostname fields and, if needed, the

Gateway IP address field. Make sure that the assigned address does not

coincide with the LAN IPv4 address of the router to which your device

connects.

If the LAN IPv4 address of DAP-300P was changed, it may be

necessary to change your PC's NIС settings.

2. Click the NEXT button.

Quick Installation Guide

Table of Contents