Selecting Operation Mode - D-Link DAP-300P Quick Installation Manual

Wireless n300 poe access point / router

Hide thumbs Also See for DAP-300P:

Table of Contents

DAP-300P

Quick Installation Guide

Selecting Operation Mode

In order to connect your device to a wired ISP, on the Device mode page,

from the Connection method list, select the Wired connection value.

Then from the Work mode list select the Router value. In this mode you can

configure a WAN connection, set your own settings for the wireless network,

configure the LAN port to connect an STB or VoIP phone, and set your own

password for access to the web-based interface of the device.

In order to connect your device to a wired router for adding a wireless network

to the existing local network, on the Device mode page, from the

Connection method list, select the Wired connection value. Then from

the Work mode list select the Access point value. In this mode you can

change the LAN IP address, set your own settings for the wireless network and

set your own password for access to the web-based interface of the device.

Table of Contents