Table of Contents
Advertisement
DAP-300P
9. On the application main page click the CHANGE ADDRESS button.
10. On the opened page, enter the IP address of the access point (by default,
the following IP address is specified: 192.168.0.50) in the device
URL address field and click the button to confirm.
11. Make sure that the application correctly identified the access point to
which you connect, and click the Open button to configure all needed
parameters of DAP-300P.
You can go through the Initial Configuration Wizard or finish the Wizard
earlier and go the configuration menu.
Quick Installation Guide
7
Advertisement
Table of Contents
