090.030-O (JULY 12) QUANTUM™ LX SYSTEM INTERFACE PANEL Page 2 OPERATION Table of Contents OVERVIEW OF A TYPICAL SYSTEM..........................3 INTRODUCTION TO THE SYSTEM INTERFACE PANEL.....................3 General Description..............................3 BASIC SIP CONNECTIONS ............................4 LOCATING THE ETHERNET CONNECTIONS........................5 CALIBRATING THE SIP..............................6 Touch Screen Calibration............................6 BROWSER AND KEYBOARD............................7 Browser and Keyboard............................7 MAIN SIP OPERATIONAL CATEGORIES..........................8...
QUANTUM™ LX SYSTEM INTERFACE PANEL 090.030-O (JULY 12) OPERATION Page 3 OVERVIEW OF A TYPICAL SYSTEM Frick Company builds numerous cooling and refrigeration Quantum™ LX products and control packages, which include the follow- ing: • Compressors (for refrigeration/cooling or natural gas extraction) •...
090.030-O (JULY 12) QUANTUM™ LX SYSTEM INTERFACE PANEL Page 4 OPERATION BASIC SIP CONNECTIONS The Frick SIP may be connected directly to a single Quan- For multiple LX Panels - Each cable should be routed tum™ LX panel for a minimum system confi guration, or it back from the LX panel to a common area, where the may be connected to an existing Ethernet network.
QUANTUM™ LX SYSTEM INTERFACE PANEL 090.030-O (JULY 12) OPERATION Page 5 LOCATING THE ETHERNET CONNECTIONS On the Quantum™ LX Side On the SIP Side The Ethernet connector for the Quantum™ LX panel Open the panel door of the SIP, and look at the rear can be found by opening the control panel door, and of the SIP unit.
090.030-O (JULY 12) QUANTUM™ LX SYSTEM INTERFACE PANEL Page 6 OPERATION CALIBRATING THE SIP Touch Screen Calibration upper left quadrants also. As the SIP comes from the factory, calibration has After the four quadrants of the screen have already been performed, and as such, should not be been touched, the screen is now calibrated, needed.
QUANTUM™ LX SYSTEM INTERFACE PANEL 090.030-O (JULY 12) OPERATION Page 7 BROWSER AND KEYBOARD lem, fi rst touch the desired text fi eld, and then touch Browser and Keyboard the [Focus] button on the bottom right-hand corner of the keyboard, fi nally touch the desired text fi eld a Both the browser and keyboard should appear on the screen once the panel has fi...
090.030-O (JULY 12) QUANTUM™ LX SYSTEM INTERFACE PANEL Page 8 OPERATION MAIN SIP OPERATIONAL CATEGORIES General Information • Options – This is a drop down menu that shows the following options: The System Interface Panel (SIP) consists of three main operational areas. They are: •...
QUANTUM™ LX SYSTEM INTERFACE PANEL 090.030-O (JULY 12) OPERATION Page 9 SIP SCREENS AND SETUP Login Page top of the page allow the user to add new units, or delete units from the list of registered units. Each To access the Login screen, press the [Admin] but- unit must have a unique name (no two units can have ton.
090.030-O (JULY 12) QUANTUM™ LX SYSTEM INTERFACE PANEL Page 10 OPERATION Edit Page This screen is used to provide all of the necessary information so that an existing network will properly Use this page whenever you wish to add change or recognize the SIP as a valid device when connected edit information that has already been entered, and to an existing Ethernet network.
Page 11
QUANTUM™ LX SYSTEM INTERFACE PANEL 090.030-O (JULY 12) OPERATION Page 11 routed to other gateways and networks. A router ters or less in length, and can use numerals and is a Gateway device that routes packets between upper and lower case letters. When using the different physical networks.
Need help?
Do you have a question about the FRICK QUANTUM LX and is the answer not in the manual?
Questions and answers