Product Introduction; Electrical Parameter - Ebyte E70-DTU User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd
Note: When turning switch M0&M1(M0=1, M1=1) to OFF position, the device will be forced into the sleep mode. In
this mode, the serial communication parameters of the device are: 115200, 8 N 1

2. Product Introduction

2.1. Electrical Parameter

No Parameter Name
1 Size
2 Weight
3 Working frequency
4 Transmitting power
5 Power supply
6 Communication interface
7 Antenna Connector
8 Interface
9 Transmitting length
10 Receiving length
11 Drive mode
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co,;Ltd
4
Description
82 * 62 *25mm
116g±2g
433M Hz
30dBm
8~28V DC, Note: Higher than 28V will cause permanent damage to the modem
8N1, 8E1, 8O1, eight kinds of UART baud rate, from 1200 to 115200bps(default 115200）
SM A
RS232、RS485
128 bytes
128 bytes
Can be configured to push-pull/high pull, open-drain
E70 -DTU (433NW30) user manual