Table of Contents
Advertisement
CLOCK
CLOCK key
Press
to set present time and then
flashes. Press
or
to adjust the time numeral segment
within 5 seconds, if you press this button for more than 2 seconds, the time will increase or decrease 10
mins per 0.5 second; if you press
again when the time flashing, the flash will stop and it denotes the
setting succeeded. After powered on,12:00 is defaulted to display and
signal will be displayed. If the
displayed on the screen, that denotes the current time value is Clock value, otherwise is Timer value.
ROUND U
ROUND key
Press this key once to activate the ROUND U function, in which case the ROUND U icon will appear.
When the ROUND U function is on, the remote control will send a temperature message to the main
control every 10 minutes. Press again to disable the ROUND U function.
Note: The ROUND U function means that the air conditioners regulates itself based on room
temperature. It does this by a sensor placed in the remote control.
SLEEP
SLEEP key
In COOL, DEHUMIDIFY and HEAT mode, pressing this key once will activate the SLEEP function, and the
SLEEP icon will appear.
Pressing again disables the SLEEP function. On changing mode or starting/stopping the unit, the SLEEP
function will be cancelled automatically.
The set temperature will rise max 1°C if the appliance operates in cooling mode for two hours, then it will
remain constant (if room temperature is 26°C or above, set temperature will not change).
The set temperature will rise max 3°C if the appliance operates in heating mode for 3 hours then it will
remain constant.
LIGHT
LIGHT key
Press once to activate or disable the light function on the main unit.
key
Under Cool or Heat mode, press this button can turn on or turn off the
function. After the
function turned on, the signal of
will display. The signal will be automatically cancelled if changing the
mode or fan speed.
TEMP button
Press this button, can select: setting temperature (
), indoor ambient temperature (
), outdoor
ambient temperature (
).
These temperature will show on the indoor unit display. The temperature on remote control is always
setting temperature.
Outdoor ambient temperature is an optional feature, which is unavailable for this model. The temperature
display for
will keep same as previous temperature.
30
Advertisement
Table of Contents
