Whirlpool AMD 064 User Manual Manual page 5

Table of Contents

Advertisement

UP/DOWN
UP/DOWN Key
Press these two keys when in COOL, DEHUMIDIFY, FAN or HEAT mode to set a temperature between
16 and 30°C. The temperature of each mode can be stored.
FAN SPEED
FAN Key
Press this key to change the fan speed cyclically as follows:
Indicates auto speed.
Indicates low speed.
Indicates medium speed.
Indicates high speed.
Note: The fan is at low speed in DEHUMIDIFY mode. The fan speed can be memorized in each mode
SWING
SWING key
When the unit is running, press this key to activate the swing function,
indicated by the swing icon.
OFF
If guide louver is stopped when it is swinging up and down, it will
remain its present position.
indicates guide louver swings back and forth in all the five places, as
shown in the figure
.
TIMER- ON key
Timer On setting: "ON" flashes and
become timer-on setting status. Pressing
numeral segment of time, increase or decrease 1 minute per time
within 5 seconds. If you hold pressing
change quickly after 2 second. The way of the change is: in the first 2.5
seconds, the change step is 1 minute. After 2.5 seconds, the change
step is 10 minutes. Press this button within 5 seconds flashing, the timer
setting succeeds. Repress this button, the timer-on will be cancelled.
Before setting the Timer please adjust the Clock to the current actual
time.
TIMER-OFF
TIMER-OFF key
Press this key once to enter TIMER-OFF setup. The TIMER OFF icon will blink. The method of setting is
the same as for TIMER ON.
will conceal, numeral segment
or
could adjust the
or
, the numeral will
29
Remote Control

Advertisement

Table of Contents
loading

Table of Contents