Related Manuals for Pulsar Z46H
Summary of Contents for Pulsar Z46H
- Page 1 CAL. Z46H MECHANICAL WATCHES Automatic winding Time and date calendar World time function Power reserve indicator...
-
Page 2: Display And Crown
DISPLAY AND CROWN Power reserve hand Bezel Dial Hour hand Date CROWN Second hand Minute hand Rotating indicator ring b: First click c: Second click a: Normal position... -
Page 3: How To Start The Watch
HOW TO START THE WATCH This is an automatic-winding mechanical watch. To initially start your watch: Swing it from side to side in a horizontal arc for about 30 seconds, to start the second hand moving. * If the watch is worn on the wrist, the mainspring will be wound automatically through normal wrist movement. -
Page 4: Screw Down Crown
SCREW DOWN CROWN [for models with screw down crown] Unlocking the crown 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. Locking the crown 1 Push Crown back in to normal position. 2 Turn Crown clockwise while pressing it lightly until tight. -
Page 5: Time/Calendar Setting
TIME/CALENDAR SETTING Setting the time Hour hand Minute hand CROWN 1 Pull the crown out to the second click. (Second hand does not stop.) 2 Turn the crown clockwise and set it to the current time. 3 Press in the crown to the normal position. - Page 6 How to adjust the calendar (date) CROWN Date 1 Pull the crown out to the first click. * The crown of this watch can be pulled out to the first and second click. 2 Turn the crown counterclockwise until you reach today’s date. 3 Press in the crown to the normal position.
-
Page 7: World Time Function
WORLD TIME FUNCTION (1) Model on which times are indicated on the rotating indicator ring Check and make sure that the watch is set to the current time. CROWN Rotating indicator ring 1 Pull the crown out to the first click. * The crown of this watch can be pulled out to the first and second click. - Page 8 (2) Model on which city names are indicated on the rotating indicator ring Check and make sure that the watch is set to the current time. CROWN Rotating indicator ring 1 Pull the crown out to the first click. * The crown of this watch can be pulled out to the first and second click.
- Page 9 (3) Model on which city names are indicated on outer rotating ring/bezel Check and make sure that the watch is set to the current time with correct AM/PM. For model with rotating bezel, turn the bezel manually without crown operation. Rotating CROWN indicator ring...
- Page 10 Comparison table of standard times Name of citys Other cities ± (hours) Greenwich Mean Time London, Casablanca, Dakar Rome, Amsterdam, Tripoli, PARIS (PAR) Paris Frankfurt, Berlin CAIRO (CAI) Cairo Athens, Istanbul, Cape Town MOSCOW (MOW) Moscow Mecca, Nairobi, Kiev DUBAI (DXB) Dubai KARACHI...
- Page 11 Name of citys Other cities ± (hours) – 10 HONOLULU (HNL) Honolulu – ANCHORAGE (ANC) Anchorage Dawson (Canada) – LOS ANGELES (LAX) Los Angeles San Francisco, Vancouver – DENVER (DEN) Denver Edmonton (Canada) – CHICAGO (CHI) Chicago Mexico City – NEW YORK (NYC) New York Washington, Montreal...
-
Page 12: Power Reserve Indicator
POWER RESERVE INDICATOR Power reserve hand The power reserve indicator shows the amount the watch is wound as an amount of time, so you can see how long the watch will run at a glance. The power reserve hand indicates the remaining amount. -
Page 13: Notes On Operating The Watch
NOTES ON OPERATING THE WATCH TIME/CALENDAR SETTING Do not set the date between 8:00 p.m. and 2:00 a.m. Otherwise, it may not change properly. * If it is necessary to set the date during that time period, first change the time to any time outside it, set the date and then reset the correct time. - Page 14 POWER RESERVE INDICATOR The remaining time shown is only an approximation. The time shown may be different from actual remaining time. This product has an automatic-winding system which comes with a power reserve indicator function. The mainspring will be automatically wound by your natural arm movements while you wear it on your wrist.
-
Page 15: Specifications
SPECIFICATIONS Vibration : 21,600 Oscillations / 1hr Loss/Gain : Within +25 and –15 Second (Daily Rate)* Jewels : 23 Jewels * The mechanism of mechanical watches is very precise and delicate. Time accuracy may change depending of which direction the watch faces. Therefore, any actual loss/gain may not fall within the range of time accuracy specified above, and depends on the condition of use, such as the length of time during which the watch is worn on the wrist, temperature, affection of strong magnetism, vibration like... -
Page 16: To Preserve The Quality Of Your Watch
3 bar, such as acci- taking a bath, shallow diving, but not for scuba dental contact with splashes of water or rain, but it is diving. We recommend that you wear a PULSAR not designed for swimming or diving. Diver’s watch for scuba diving. - Page 17 * Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
-
Page 18: Periodic Check
PERIODIC CHECK CARE OF CASE AND BRACELET To prevent possible rusting of It is recommended that the the case and bracelet caused watch be checked once every b y d u s t , m o i s t u r e a n d 2 to 3 years.
Need help?
Do you have a question about the Z46H and is the answer not in the manual?
Questions and answers