Using Autoanswer - Cisco 7925G-EX User Manual

• If a Bluetooth headset is in power-save mode and becomes disconnected from the phone, you may
need to tap the headset once to "wake" it to reestablish a connection.

Using AutoAnswer

You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of
others. Your system administrator configures AutoAnswer to work with either your speaker mode or
headset.
If you...
Use AutoAnswer with a
headset
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Then...
Keep headset mode active by ensuring the headset is plugged into the
phone, even when not on a call.
If your phone is set up to use AutoAnswer in headset mode, calls are
answered automatically only if the wired headset
Bluetooth enabled
ring normally and you must manually answer them.
Using a Handset, Headset, and Speakerphone
icon is in the phone status line. Otherwise, calls
icon or the
73