Obtaining Headsets; Using Bluetooth Wireless Headsets - Cisco 7925G-EX User Manual

If you want to...
Switch to the speaker (from
the handset) during a call
Adjust the volume level for a
call
Tip
If you unplug the headset or remove the phone from the desktop charger, the phone reverts to the
speaker mode for features that typically use the speakerphone for incoming calls, such as AutoAnswer
or intercom calls.

Obtaining Headsets

Your phone supports wired headset jack types with a 2.5 mm, 3-band/4 connector. For information
about purchasing headsets, see

Using Bluetooth Wireless Headsets

Your phone supports the use of Bluetooth wireless headsets. Enable the Bluetooth setting on your
phone before performing tasks such as scanning, pairing, and unpairing.
Before pairing the Bluetooth headset with the phone, follow the instructions in the headset
Note
documentation to enable it for operation.
70
Then...
Press and hold until the
Press and hold to toggle back to the handset.
During a call, press
speaker, or headset.
Note The new volume level is preserved for future calls after the
phone is powered off.
Headset Information, page
icon appears.
to adjust the volume for the handset,
17.