Cisco 7925G-EX User Manual page 82

If you want to...
Unpair a Bluetooth headset
from the phone
Disconnect a Bluetooth
headset from the phone
Switch from a Bluetooth
headset to the speaker or
handset during a call
Switch to the Bluetooth
headset during a call from
the speaker or handset
Tips
• Only one Bluetooth device can be connected to the phone at one time.
• A Bluetooth device must remain within 10 m of the phone to keep the connection.
• A Bluetooth device disconnects if the phone is powered off or if Bluetooth is disabled on the
phone.
• If a device previously paired with the phone is used to connect to another Bluetooth device, you
must first unpair it, then pair it again with the phone.
• If a Bluetooth headset becomes disconnected (being out-of-range of the phone or the phone battery
loses power), it should automatically reconnect when it is in-range again or the battery is
recharged. If it does not reconnect, you can tap on the Bluetooth headset once to reestablish the
connection.
72
Then...
1. Choose
2. Select a headset from the list, press Options > Unpair.
3. Press Yes to confirm.
The headset disconnects from the phone and is removed from the
Device List.
1. Choose
2. Select a headset from the list, press Options > Disconn.
3. Press Yes to confirm.
The headset disconnects from the phone but remains on the Device
List (without a checkmark next to the device name).
1. Press and hold
2. Select Speaker or Handset.
3. To switch modes again, press and hold
audio mode.
Note After the call, the phone remains in the last audio mode it used
during the call.
1. Press and hold
2. Select Bluetooth.
If a wired headset is connected to the phone, the Bluetooth option
Note
cannot be selected even if the Bluetooth connected icon is
displayed. To use the Bluetooth headset, you must first unplug the
wired headset.
> Phone Settings > Bluetooth > Device List.
> Phone Settings > Bluetooth > Device List.
. The Select Audio Path menu appears.
. The Select Audio Path menu appears.
, and select another