Saeco DUALLY Operation And Maintenance page 94

English
• Wait for the pre-heating phase to be completed.
1 The machine is warming up
When the messages disappear from the screen and the
keys become clearer, the machine is ready for brewing.
In line with the coffee dispensing spout where the
container is placed:
• Open and close the capsule loading tray and press the
"FREE" button - with no capsule inserted - to start
brewing.
• When the water starts flowing from the spout, press the
"FREE" button again to stop dispensing.
94
• If machine does not detect water into circuits, a pump
priming alert will be shown: press on image and wait for
automatic priming procedure completition.
Repeat the rinsing of the circuits on the other side of the
machine, so that both sides are rinsed, then proceed.
Hot water and steam
may cause
Follow
WARNINGS
instructions described
in chapter
knob" to:
• Dispense a cup of water by pressing the corresponding
display button.
scalding!
the
and
"Steam