Saeco DUALLY Operation And Maintenance page 92

English
Remove the lid cap from the water tank.
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level.
When filling the water
tank, use sterile disposable
gloves
bacteriological
contamination.
Place the lid and insert the water tank back into its seat.
Replace and close the drip tray and capsule drawer.
92
to prevent
7.1.2 Filling the water tank (water
network version)
When the machine is powered on, the following message
is shown on the display:
Check that the tank is correctly in place and press 'OK'
The machine will begin to fill the water tank with water
from the network.
After a preset amount of time, it will stop.
If the water level sensor detects that the tank has not been
filled with water, the unfilled tank error message will
appear on the display.
To fix the issue, please refer to the 'Warning Signals'
section.