Inadequate Water Flow Led - Hayward AquaRite 100 Troubleshooting Manual

Inadequate Water Flow LED

With "Standing BY" LED
Reason
Power to the pump is
turned "off"
AQR 100 is between
generating cycles
14
Possible Action
Turn power to the pump
"on"
Wait until next generating
cycle begins or cycle power
to the AquaRite 100
With "Problem Detected" LED
Reason
No water flow Verify pump is "on"
Remove power for two minutes
detected
Low water Check for obstructions or other flow
related issues in plumbing. Verify filter is
flow detected
clean.
Possible Action