GE Power Break II Installation Instructions Manual page 3

WARNINGS
Warning notices are used in this publication to emphasize that hazardous voltages, currents,
or other conditions that could cause personal injury are present in this equipment or may be
associated with its use.
Warning
knowledge could cause either personal injury or damage to equipment.
CAUTIONS
Caution notices are used for situations in which equipment might be damaged if care is not
taken.
NOTES
Notes call attention to information that is especially significant
operating the equipment.
This document is based on information available at the time of its publication. While efforts
have been made to ensure accuracy, the information contained herein does not cover all
details or variations in hardware
contingency in connection with installation, operation, and maintenance. Features may
described herein that are not present in all hardware and software systems. GE Electrical
Distribution
respect t o changes subsequently made.
GE Electrical Distribution
implied,
completeness, sufficiency, or usefulness of the information contained herein. No warrantees
of merchantability or fitness for purpose shall apply.
The following are trademarks of GE Company:
Power Break®, MicroVersaTrip PMn1, MicroVersaTrip Plusn1, Power+n1, POWER
LEADERDI
GEH-62718
WARNINGS, CAUTIONS, AND NOTES
AS USED IN THIS PUBLICATION
notices are also used for situations in which inattention or lack of equipment
& Control assumes no obligation of notice to holders of this document w i t h
& Control makes no representation
or statutory, with respect to, and assumes no responsibility
© 1997
All Rights Reserved
and software, nor does it provide for every
GE Company
to understanding and
possible
be
or warranty, expressed,
for the accuracy,