Schaudt LAS 1218 BUS Operating And Installation Instructions page 4

Operating and Installation - Battery Charger LAS 1218 BUS
TF 25 A battery
temperature sensor
(optional)
4
Different charging characteristics can be set with two battery selector swit-
ches for the perfect charging of different battery types. Temperature com-
pensation of these charging characteristics is realised with (optional) tempe-
rature sensor affixed to the battery, and results in additional optimisation of
battery charging at maximum battery protection.
The LAS 1218 BUS battery charger is aligned perfectly to Schaudt bus sy-
stems, and a corresponding connection to the SDTBUS
into the system. This enables fully-automatic control of the entire charging
process with all chargers and batteries connected.
The LAS 1218 BUS battery charger is also excellently suited in conventional
systems and as standalone chargers.
This device is not intended to be used by those (including children) with
Y
limited physical, sensory or mental aptitude or lack of experience and/or
knowledge unless they are supervised by a person responsible for their
safety or have received instruction from this person as to how the device
is used.
Children are to be supervised so as to ensure they do not play with the
Y
device.
This device is intended for installation into a vehicle.
Y
The device is a primary controlled switch-mode power supply unit. This mo-
dern switching technology achieves high charging performance at a compact
size and low weight.
The battery charger can be used:
as a battery charger for charging the leisure area battery and for re-
F
charging a connected starter battery
as an auxiliary charger for loading leisure area batteries with higher
F
capacities, suitable for every Schaudt EBL electroblock with an LAS
charger module (the possible number of auxiliary chargers depends
on the number of auxiliary charger connections on the respective
EBL)
as an auxiliary charger for charging leisure area batteries with higher
F
capacities, suitable for every SDTBUS
electroblock (up to two auxiliary chargers can be connected here)
as a power supply unit (up to 18 A) for the 12V consumers connected.
F
No battery is required here.
The optional TF 25 A battery temperature sensor is used to implement bat-
tery temperature-controlled charging.
Date: 21.11.2018

links the device

-capable Schaudt EBL ...
8100532 BA / EN