Schaudt LAS 1218 BUS Operating And Installation Instructions page 10

Table of Contents

Advertisement

Operating and Installation - Battery Charger LAS 1218 BUS
Deliverables for
connector sets
2.3.1
Fuse protection
2.3.1.1
Auxiliary charger
10
The following sets are available for different applications:
Part number 999.308 for vehicles for which the 230V connector is a
F
Wago connector, and the auxiliary charger connector on the EBL has
an MNL connector
Part number 999.305 for general upgrades with an additional charger
F
(on Schaudt EBLs with MNL or Minifit connector for additional charger
or for the direct connection to leisure and, where applicable, starter
battery)
Part number 999.309 for vehicles for which the 230V connector is a
F
Wago connector, and the additional charger connector has an MNL or
Minifit connector; this connector set is also suitable for Schaudt bus
systems (SDTBUS
General
ATTENTION!
Y
Short-circuits can cause cable fire or damage to the battery charger. So the-
refore:
To protect the supply lines in the event of a short circuit, connect the
F
fuses directly to the positive terminal of battery.
Select cable cross-sections in line with EN 1648-1/-2. The maximum current
load must not exceed 90% of the individual fuse rating.
Recommended cable cross-sections:
Line length*
(sum of supply and return lines)
Up to 4 m
Up to 8 m (only for leisure area battery)
Up to 12 m (only for leisure area battery)
 Fuse the supply lines as follows:
2
with 1.5 mm
cable cross-section
F
2
with 2.5 mm
cable cross-section (or greater)
F
Connection as for auxiliary charger to the electroblock
The LAS 1218 BUS battery charger can also be used as an auxiliary charger
for a Schaudt electroblock. Suitable for use here are all Schaudt electro-
blocks that include the LAS charger module and have the 2-pin MN connec-
tor (e.g. EBL 99) or Minifit connector (e.g. EBL 220) for an auxiliary charger.
See the operating instructions for the electroblock, "Suitable accessories".
Date: 21.11.2018
)
Cable cross-section
2
2,5 mm
2
4,0 mm
2
6,0 mm
10 A
20 A
8100532 BA / EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents