In-situ VuLink CI Operator's Manual page 17

Hide thumbs Also See for VuLink CI:
Table of Contents

Advertisement

Storage Temperature
Operating
Temperature
Ingress Protection
Protocols
Connectors
Simultaneous
Connections
Venting
Barometric
Compensation
Barometer Accuracy
Alarms
Power
Wireless Setup
Logging Rate
Transmission Rate
Memory
Authorised distributor
In Australia:
For customer service, call 1300-735-292
To email an order, ordersau@thermofisher.com
To order online: thermofisher.com
1-970-498-1500
-20C to 60C
-20C to 50C (Li-MnO₂), 5C - 40C (Alkaline)
Device: IP68
System: Up to IP68 per antenna specification
Modbus over RS-485, SDI-12, Pulse low/high frequencies (max 40 khz)
1 In-Situ Twistlock (supports multiple instruments via Rugged Cable Splitter
or Load-bearing Universal Adaptor)
Up to 8 instruments
Built-in on all models, no desiccant required
Built-in on all models for automatic compensation of level readings
+/- 1 hPa
Configurable based on instrument readings and device parameters, second
reading/reporting schedule available when in alarm state
Max 75mA provided to connected instruments at 16V
Supported via Bluetooth Low Energy
1 minute to 7 days
5 minutes to 7 days
512 MB (on-board)
In New Zealand:
For customer service, call 0800-933-966
To email an order, ordersnz@thermofisher.com
To order online: thermofisher.com
17
www.in-situ.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

0094840

Table of Contents