Assembly; Commissioning; Operation - unicraft MH 3 Operating Instructions Manual

Assembly

7 Assembly
Use protective gloves!
Use protective boots!
Wear protective clothes!
ATTENTION!
Risk of crushing!
Incorrect work on the Hydraulic machine lift can
cause injury to upper limbs.
Equipment that is not used in a fixed location must be in-
stalled in such a way that it is horizontal and that no
crushing or shearing points can occur between the
machine and parts of the environment.
Furthermore, it must be ensured that intended activities
can be carried out without hindrance. Equipment
intended for a fixed location must be placed horizontally
or in a dedicated pit.
8

Commissioning

All work on the commissioning of the scissor lift table
may only be carried out by licensed specialists.
All functions of the Hydraulic machine lift must be
checked before commissioning.
8
9

Operation

DANGER!
DANGER TO LIFE DUE TO FAL-
LING OF THE LOAD!
Falling loads can cause serious injury or death.
- Overload is prohibited! Check that the load never
exceeds the maximum load stated on the name-
plate
- Never move the lifted load.
- Never stand or work under a load lifted by the ma-
chine lifter.
- A lifted load must never be subjected to impact or
shock loading.
- Make sure that the ground on which the machine lift
stands is sufficiently strong and level to hold the
load.
- Never use the machine lift to lift a load that can slip,
fall or tip over, or its components are not firmly
connected.
- Never use a rusted or damaged machine lifter.
- Never leave a load lifted by the machine lift unatten-
ded.
- While lifting or lowering a load, make sure that the
operator is out of reach of the load at all times. If it
slips, falls or tips over.
- Never carry the machine lifter by its operating lever.
- It is prohibited to position shims between the head
or jaw of the machine lifter and the point of load
bearing
Use protective gloves!
Use protective boots!
Wear protective clothes!
NOTE!
- Operating personnel must be familiar with the oper-
ation and functions of the Hydraulic machine lift and
the safety regulations pertaining to it.
- The operator is responsible for ensuring that all op-
erating personnel have had the necessary training.
MH-Series | Version 2.01