Advertisement
3. Secure the pandant head using the included screws.
4. Install the pendant pipe of a preferred length.
5. Tighten the socket hex screw using the hex wrench.
6. Install the AE-153 top bracket.
7. Secure the installation by tightening the socket hex screw.
AM-114
AM-117
AE-153
8. Prepare the AE-153 bracket components. The components are shown below:
Housing
3
5
4
6
Cable gland
Slide bracket
This side with a
model name tag.
7
SC8131
VIVOTEK
Thermal pads
Side cover
The default camera
front side.
Installation Guide
Advertisement
