III. T1 Pro Special Accessory Guideline
Accessory Buoyancy Block Installation
① Align the mounting hole with the hole on bracket, with the arrow of
buoyancy block upward.
② Install the wing screw through the hole, insert from the outside to the
inside, and tighten the nut by hand.
Note: External battery needs 4 blocks; other devices do not need
to install buoyancy blocks.
Underwater Gripper
Installation
① Match the mounting bracket of the underwater gripper to the mounting
hole at the bottom of the host, and fix with screws.
② Insert the connector of the underwater gripper into the extension port,
and tighten it clockwise.
Device
After underwater gripper plugged in, APP will automatically identified
and showing the icon on the interface, it can operate by click the icon.
© 2020-2022 GENEINNO All Rights Reserved.
①
①
②
②
7