Table of Contents
Advertisement
II. User Manual
1. APP Download
l Scan QR code to download "Geneinno"APP.
l Open APP, Please register as a Geneinno member and log in.
2. Start
l Separately insert the two buoyancy cables into the T1 PRO and the wireless
relay then tighten the fastening nut.
Note: Check whether the O-ring on the waterproof connectors
missing or damaged. If missing or damaged, please replace it in
time.
Device Connect：
l Open APP choose T1 Pro, click "Device not connected" icon, jump to the
Wi-Fi setting page, find and connect the Wi-Fi named GENEINNO-5G-
XXXX/GENEINNO-XXXX, default code is: 88886666
l After Wi-Fi connected, back to APP main interface, click "Device connected"
icon to enter the control interface.
© 2020-2022 GENEINNO All Rights Reserved.
4
Advertisement
Table of Contents
