CONTENT I. Users tips II. Product Overview Titan graphic Connect Titan Bluetooth controller Charge III. APP operation App main page App operation interface APP system settings APP info APP photo and video IV. Brief Troubleshooting V. Appendixes Product parameter list...
5.After the end of use, please rinse with fresh water and dry , especially keep the insertion dry.Reduce corrosion of sea water and store in dry ventilation 6.Titan is designed for positive buoyancy. It is recommended to be used in clean water so as not to stick sediment to affect buoyancy balance.
II. Product Overview: Titan is a consumer level underwater intelligent robot, equipped with A17/A7 dual- core CPU, supporting H265, 4K video encoding and decoding. Equipped with professional deep-sea starlight level 4k camera, front 3000lm led light, and built-in special image processing DSP, At the same time, the whole machine adopts industrial-grade waterproof scheme, with a maximum diving depth of 150m.The maximum speed is 2m/s, 2 high-power...
2. App connect: when Titan gets to work(about 1 minute after connection), the LED light on ,Titan will flash twice every several seconds, it means the Titan is ready to connect to your phone, pad and PC devices, search the Wi-Fi hotspot named GENEINNO_XXXX, connect your device to it, the default passwords is 88886666, then get to the app control interface.
Open the APP on your device, open the right menu bar, open Bluetooth controller, tap to search the controller, you can find the BLE device named GENEINNO-XXXX, tap to connect; when Bluetooth controller connected, the LED1/2 light stays on.
Please charge Titan when battery is low using standard charger and plug; charge Titan for 3 hours, wireless relay for 2 hours; signal lights on charger is red when it’s charging, turn into green when fully charged.
2. Connected to the GENEINNO WIFI hotspot, but can't see the real-time picture, can't control: Check if Titan LED flashes, such as flashing 3, 4 or 5 times, the internal fault of the host, please contact after-sales customer service. When LED light does not flash, please confirm whether the battery is low, try to use it again after charging;...