Table of Contents
Advertisement
Safety Guide
1.
Please use our product in open water and in an environment with
relatively clear water quality. Try to avoid operating in an environment with
too many aquatic plants, too turbid, or very complicated underwater
structures.
2.
Make sure there are no dense radio devices or huge metal objects around
the wireless relay and turn on the antenna correctly to avoid affecting the
reception of the wireless relay signal.
3.
Please use the official standard charger to charge, please charge in time
after the battery is alarmed, and do not completely use up.
4.
After use, please rinse with fresh water and dry in time to avoid seawater
corrosion, and store in a dry and ventilated place.
5.
The host is designed with positive buoyancy before installed buoyancy
material. It is recommended not to install buoyancy material in fresh water,
in seawater can be installed buoyancy material, please adjust the
installation position according to the actual balance of the host, subject to
the best balance the host can achieve
6.
The wireless relay is designed as low-grade waterproof standards, please
do not use it directly in water or wash it directly with water.
7.
Before using/charging, please check all waterproof connectors if any liquid
left such as water, please make it clear before connect. It is recommended
to connect the wireless relay first, then connect to the host, the system will
boot, when finish using, only needs to disconnect the cable and the host.
8.
Please carefully check the motor and propeller make sure it clear before
use, do not put your fingers or other body parts into the thruster net cover
when the product is working, please clean the surface attachments of the
motor and propeller after the machine is off, and wash with fresh water.
9.
Aged 16 and below must be under surveillance of adults when use this
product, please control the speed while using, avoid excessively fast
movement in case scratches or damage equipment.
10. Do not place heavy objects on this product, do not expose it to the sun,
and do not store it in a very humid/corrosive environment.
11. Please connect the host and the wireless relay and connect to the APP,
follow the instructions to calibrate the compass, and check that the video,
data transmission and control are normal, then put it in the water.
According to the use environment, should set sea water or fresh water in
the APP to avoid affecting the water depth data.
© 2020-2022 GENEINNO All Rights Reserved.
3
Advertisement
Table of Contents
