Geneinno T1 Pro User Manual page 11

IV. Recharge Guideline
l You can check the battery information of the host on the operation interface,
also can be checked by the battery indicator light on the wireless relay.
Please charge in time when the battery is low, use the standard charger and
connector to charge the host, charging time is about 3 hours, wireless relay
is about 2 hours. The indicator on charger showing red light when it's
charging, turn green when it finish charge.
l Charging should be in the dry place on shore, please do not let the charging
connector come into contact with water.
l Please use the standard dedicated charger to charge the external battery.
①
① Underwater robot Charging: Connect the charger connector to the host
signal/charging port tightly.
② Wireless Relay Charging: Connect the charger connector and the
wireless relay signal/charging port tightly.
③ External Battery with LED Charging: Connect the charger connector to
the external battery connector with the special charger tightly. For
charging the external battery with LED, please use the standard
dedicated charger only.
Note: The special charger for external batteries can only charge
external batteries, and is not allowed to charge any other devices.
© 2020-2022 GENEINNO All Rights Reserved.
②
10