Steps
1. Insert the slim ODD assembly into the ODD slot.
2. Slide the slim ODD assembly until it snaps into place.
3. Route the power cable and data cable through the routing guides and connect the cables to the slim ODD.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Speaker
Removing the speaker
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
44
Removing and installing components
after working inside your
before working inside your
computer.
computer.