Pre-Maintenance
Procedures
Preparing for Maintenance
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Press the cutting unit drive switch to the
D
position
ISENGAGE
Figure 49
1. Cutting unit drive switch
2. Lower mow/raise control
3. Engage
4.
Move the mow/transport slide right, to the M
position.
Figure 50
1. Mow/transport slid
5.
Move the lower mow/raise control lever forward
(Figure
49).
6.
Shut off the engine, and remove the key.
7.
Wait for all parts to stop moving.
(Figure
49).
4. Disengage
5. Lower
6. Raise
2. Mow
Removing the Battery
Cover
Remove the 2 knobs that secure the battery cover to
the machine, and remove the cover
1. Knob
2. Battery cover
Opening the Hood
1.
Release the latches at the left side and right side
g352479
of the hood
OW
1. Hood latch
2.
Rotate the hood up and back
g352635
41
(Figure
Figure 51
(Figure
51).
Figure 52
(Figure
Figure 53
48).
g336164
g336542
52).
g336543