Toro Reelmaster 3555 Operator's Manual page 32

Figure 38
1. Cutting unit drive switch
2. Lower mow/raise control
4. Push the lower mow/raise lever forward
37) to lower and run the cutting units (the front
cutting units are timed to lower before the rear
cutting units).
5. Press the traction pedal forward to drive forward
and cut grass.
6. Momentarily pull the lower mow/raise lever to
raise the cutting units at the end of a cutting
pass so that you can align the machine for the
next cutting pass.
Note:
Push the lower mow/raise lever forward
again to lower and run the cutting units.
Driving the Machine in Transport
Mode
1. Move the cutting unit drive switch to the
D position.
ISENGAGE
2. Raise the cutting units to the transport position.
3. Move the mow/transport slide left to the
T position.
RANSPORT
Figure 39
1. Transport
Important:
Be careful when driving between
objects so that you do not accidentally damage
g352636
3. Engage
4. Lower
(Figure
g352480
2. Mow/transport slid
the machine or the cutting units. Use extra care
when operating the machine on slopes. Drive
slowly and avoid sharp turns on slopes to prevent
rollovers.
Note:
You cannot lower the cutting units while
operating the machine the transport mode.
32