Table of Contents
Related Manuals for Evonicfires E-Smart Newton 6
Summary of Contents for Evonicfires E-Smart Newton 6
- Page 1 English English NEWTON NEWTON E-Smart E-Smart INSTRUCTION MANUAL INSTRUCTION MANUAL Newton 6 Newton 6 Newton 9 Newton 9 Newton 7 Newton 7 Newton 10 Newton 10 EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2...
-
Page 2: Table Of Contents
CONTENTS EU Directives and UKCA Standards..............3 Important Information and Health & Safety............4 Components for Newton..................5 App Instructions....................6 E-Smart Cloud App Instructions ..............7 Pairing with Amazon Alexa................10 Pairing with Google Home................13 Installation......................16 Model Dimensions..................17 Installation Process.................. -
Page 3: Eu Directives And Ukca Standards
EU DIRECTIVES All Evonic Fires products meet the requirements of the EC Directives. All Evonic Fires products meet the requirements of the EC Directives. These directives have been met by compliance with the following standards: These directives have been met by compliance with the following standards: EU 2011-65/EU 2015/863 Restriction of Hazardous Substances. -
Page 4: Important Information And Health & Safety
IMPORTANT INFORMATION AND HEALTH & SAFETY When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • Read all of the instructions carefully before using the appliance, only use this appliance as described in this manual. -
Page 5: Components For Newton
EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... -
Page 6: App Instructions
APP INSTRUCTIONS APP INSTRUCTIONS E-Smart Cloud E-Smart Cloud EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... -
Page 7: E-Smart Cloud App Instructions
E-SMART CLOUD APP INSTRUCTIONS The E-Smart Cloud app is a WiFi app that can be used with both smart phones and tablet The E-Smart Cloud app is a WiFi app that can be used with both smart phones and tablet devices, and is available on both the Apple App Store and Google Play Store. - Page 8 CONTROL OVERVIEW To adjust the desired temperature of your fire ensure that the heater is selected on the To adjust the desired temperature of your fire ensure that the heater is selected on the Home Page in the previous step. Then press, hold, and rotate the temperature dial to set Home Page in the previous step.
- Page 9 PROGRAMMING THE TIMER Single press the clock icon on the Home Single press the clock icon on the Home Input your desired time in the Time box, Input your desired time in the Time box, Page to begin programming the Timer. Page to begin programming the Timer.
-
Page 10: Pairing With Amazon Alexa
Single press Search and type in Single press Search and type in Now on the Evonicfires Halo skill page Now on the Evonicfires Halo skill page evonicfires. Select the Evonicfires Halo evonicfires. Select the Evonicfires Halo... - Page 11 Enter the log in details that you Enter the log in details that you After a few moments your account will After a few moments your account will previously entered in the app set up previously entered in the app set up be linked, once this is done you can be linked, once this is done you can process, and single press Log In.
- Page 12 ALEXA COMMANDS When using Alexa to control your appliance settings remember to substitute the words ‘the fire’ for whatever you have named your appliance. Turning the appliance On and Off. “Alexa, turn fire on.” “Alexa, turn fire off.” Turning the heater On and Off. “Alexa, set fire heater to auto.”...
-
Page 13: Pairing With Google Home
PAIRING WITH GOOGLE HOME Once your fire is installed, and switched Once your fire is installed, and switched Single press Set up Device on the pop Single press Set up Device on the pop on, download and open the Google on, download and open the Google up list. - Page 14 Type in Evonic Fires, single press Type in Evonic Fires, single press Once in the evoflame log in page, enter Once in the evoflame log in page, enter search and then select the Evonic Fires search and then select the Evonic Fires the log in details that you previously log in details that you previously E-Smart icon.
- Page 15 GOOGLE HOME COMMANDS When using Google Home to control your appliance settings remember to substitute the words ‘the fire’ for whatever you have named your appliance. Please note that the Google Home app cannot control the heater in the appliance. Turning the appliance On and Off.
-
Page 16: Installation
INSTALLATION INSTALLATION EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... -
Page 17: Model Dimensions
MODEL DIMENSIONS The model shown in these drawings is a Newton 10, however the same processes apply to all Newton models. Scan the QR code for more detailed specification drawings. EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... - Page 18 MODEL DIMENSIONS Model Width Height Depth Overall unit Opening Overall unit With optional Open sides side panels Newton 6 686mm 671mm 665mm 458mm 197mm Newton 7 690mm 672mm 484mm 277mm 197mm Newton 9 876mm 868mm 700mm 495mm 197mm Newton 10 1042mm 1034mm 492mm...
-
Page 19: Installation Process
INSTALLATION PROCESS Newton Model Newton Model (GF) (GF) (GF2) (GF2) (GF3) (GF3) Open Open 2 Open Sides 2 Open Sides 3 Open Sides 3 Open Sides Fronted Fronted Fit 2 Side Panels Fit 2 Side Panels Fit 1 Side Panel Fit 1 Side Panel Pages 21 Pages 21... -
Page 20: Converting To Gf / Gf2 / Gf3
CONVERTING TO GF / GF2 / GF3 The appliance is shipped in the GF3 configuration, however all Newton models can be converted to be GF or GF2 with 2x side panels, these are an optional extra. GF Configuration A single opening at the front of the appliance. GF2 Configuration A single opening at the front and one open side. -
Page 21: Installing The Side Panels / Converting To Gf / Gf2
INSTALLING THE SIDE PANELS / CONVERTING TO GF / GF2 Unscrew and remove the plaster kits from the side/s of the appliance. Screw in the side panel/s, on one or both sides. EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... -
Page 22: Requirements And Checks
INSTALLATION INSTALLATION REQUIREMENTS Before installing the appliance please read and take into account the following important requirements; • Consult a qualified professional to check the structure of the installation site. • The appliance must never be installed in front of an electrical socket. •... - Page 23 CHECKS BEFORE INSTALLATION We recommend turning on the appliance before installation, connect the appliance to a power source using the provided electrical lead, and depress the right side of the rocker switch. Once turned on and checked, remove the electrical lead from the wall and continue with the installation.
-
Page 24: Installation
TOOLS REQUIRED • Tape Measure • Rear Wall Screws (Masonry type supplied) • Pencil • Top Mounted Bracket Screws x 6 (supplied) • Spirit Level • Top Mounted Bracket Wall Screws x 8 • Screwdriver (supplied) • PZ2 Screw Bit •... - Page 25 Determine the finished height and position that you want the appliance to be located. Then secure the wall bracket to the wall in the position you need using the wall plugs and screws provided. If you’re not securing the appliance to a masonry wall you will need to use the appropriate fixings.
- Page 26 Screw the two top mounted brackets to the wall. You can now construct your stud wall/s around the appliance in the design of your choosing. When constructing the studwork, remember that the vents on the underside of the appliance need a minimum of 50mm clearance beneath them.
- Page 27 Your plasterboard can now line up with the plaster kits on the edge of the appliance. Alternatively, the chrome side panels can be attached to the case with the magnets as shown below. Ensure that the magnets are positioned with the short side touching the case. EVONIC - 104 INSTRUCTION MANUAL ISS.
-
Page 28: Log Layouts
LOG LAYOUTS LOG LAYOUTS EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... - Page 29 LOG LAYOUTS When you have your appliance installed you can set up your log set/s. There is no right or wrong way to arrange your logs, the following images are an example of how you could lay them out. Legacy 6 Log Set - 10 pieces Woodland or Silver Birch Finish •...
-
Page 30: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING EVONIC - 104 INSTRUCTION MANUAL ISS. 2 EVONIC - 104 INSTRUCTION MANUAL ISS. 2... - Page 31 Fan Re-setting & Replacement Scan the QR code to be taken to a video in our maintenance series. Please note; this video shows one of our glass fronted models, on Newton models there is no front glass, however the process is still the same.
- Page 32 CK Fires Ltd / Evonic Fires 1, Evonic House, Clifford Park, Clifford Lane, Stratford-on-Avon, CV37 8HW Tel: +44 (0)1789 263868 Fax: +44 (0)1789 293080 Email: sales@evonicfires.co.uk Follow us on: Instagram | Facebook | Twitter | LinkedIn @evonicfires EVONIC - 104 INSTRUCTION MANUAL ISS. 2...
Need help?
Do you have a question about the E-Smart Newton 6 and is the answer not in the manual?
Questions and answers