Button (Vol); Chassis (Sd Card) Block - Sony PCM-D10 Service Manual

PCM-D10

2-26. BUTTON (VOL)

8 button (VOL)
top side

2-27. CHASSIS (SD CARD) BLOCK

• Note about installing the chassis (SD card) block
When the chassis (SD card) block is installed, secure the
two shield wires with the rib of the chassis (SD card) block.
– Inner view –
rib
two shield wires
46
3 boss
hole
hole
front side
top side
two shield wires
top side
two
grooves
1 two screws
(Z1.7 4.5)
4 button (light)
6 knob (power)
7 knob (hold)
3 boss
5 claw
5 claw
1 Remove the button block in
the direction of the arrow.
2 chassis (SD card) block
boss
Note: When installing the chassis (SD card) block,
boss
rib
front side
Sony CONFIDENTIAL
For Authorized Servicer
2 two bosses
bottom side
align the two grooves and two bosses.
bottom side
SYS SET