Table of Contents
Advertisement
Instruction manual for ECOSOFT Robust reverse osmosis system
3.3. ECOSOFT Robust with pressure tank and ultraviolet unit
The manufacturer reserves the right to amend design or components of the product, if such amendment does
not result in deterioration of its quality and performance.
4. INSTALLATION STEPS
Carefully read this manual before installing the reverse osmosis system.
4.1. INSTALLATION CONDITIONS AND PACKAGE COMPLETENESS CHECK
1) Check that all components of the reverse osmosis system (see p. 2.3) are inside the
package. Do not open plastic bag before you make sure it contains all parts. Missing
part claims will not be accepted if the package is broken.
2) Ensure that your utilities meet this product's requirements:
Inlet water pressure*
Test water pressure at the
tapping point. It must comply
with specification in p. 2.1.
* If any of the parameters does not meet requirement, consult p. 2.1 for possible corrective action.
— check other parameters of the technical specification (p. 2.1);
This manual is the intellectual property of, and copyrighted by ECOSOFT SPC LLC. Copying and reprinting is forbidden. © 2015
Pressure in tank bladder
If using pressure tank, test
pressure in the bladder. It must
comply with specification in
p. 2.1.
Influent water temperature
Test water temperature and
verify compliance with
specification in p. 2.1.
| 10
Advertisement
Table of Contents
