Baumer Hübner DeviceNet HMG10 Operating Manual page 3

Baumer Hübner
6.2 Terminal box ....................................................................................................................................... 33
6.2.1 Pin assignment at terminal box ............................................................................................. 33
6.2.2 Output signals additional incremental output (optional) ........................................................ 33
6.2.3 Switching level additional output incremental (optional) ....................................................... 34
6.2.4 Programming interface (only for programmable variant) ...................................................... 34
6.2.5 LED activity indicator ............................................................................................................ 34
6.2.6 Output switching behavior Speed switch (optional) .............................................................. 35
6.2.7 Connecting the supply cable ................................................................................................. 35
6.2.8 Pin assignment ..................................................................................................................... 37
6.3 Sensor cable....................................................................................................................................... 38
6.4 Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P/PMG10P ........................................ 38
7 Disassembly................................................................................................................................................. 39
7.1 Removing the encoder from blind hollow shafts or cone shafts ......................................................... 40
7.1.1 Loosen fastening aids provided at the blind hollow shaft...................................................... 40
7.1.2 Threaded pin to secure at blind hollow shaft ........................................................................ 41
7.1.3 Detaching the encoder from blind hollow shafts ................................................................... 42
7.2 Detaching the encoder from through-hollow shaft .............................................................................. 43
8 Technical data.............................................................................................................................................. 44
8.1 Blind-hollow shaft dimensions ............................................................................................................ 46
8.2 Through hollow shaft dimensions ....................................................................................................... 46
8.3 Cone shaft dimensions ....................................................................................................................... 47
V1, T1 | HMG10 & HMG10P DeviceNet Operating Manual
List of contents
iii