Table of Contents
Advertisement
ET System electronic GmbH
Figure 5.2 OCP Page
5.3 Over-power protection (OVP)
The E-load provides over-power protection. When the input power is higher than the
setting power (See Chapter 4.1 - System Settings - Power Protection), the E-load will
display" OVER POW", the E-load will be immediately OFF and the buzzer will sound.
Press any key to cancel the beeper.
Figure 5.3 OPP Page
5.4 Over-temperature protection (OTP)
When internal temperature higher than 80 °C, the E-load will enter the state of
temperature protection and LCD will display "OVER TEMP". At this time, the E-load will
63
Advertisement
Table of Contents
