Table of Contents
Advertisement
ET System electronic GmbH
Chapter 4 System settings and Save function
Press key
to go to system configuration and save f interface, as shown below:
Figure 4.1 MENU Page
The system settings is used to set the parameters of the load, such as range, protection, Von,
Voff, etc.
The parameter settings mainly contain common parameters setting of the load,
communication and output interface signals.
The save function mainly stores and recalls the common setting for convenient and fast
usage.
4.1 System Settings
In MENU page, select the item SYSTEM and press the key
to enter the parameter
setting page, as shown below.
Figure 4.2 System Setting
54
Advertisement
Table of Contents
