Lcd Status Bar Function - Et system ELP/DCH Series User Manual

10 SENSE Remote compensation port
Front panel key description
When in the standby state, the panel POWER button light is red,
press the POWER button for 3s, the power is turned on, the screen is
lit, and the panel button light turns green.
In the working mode, press the key SET to set the parameters
corresponding to the mode.
Long press to open/close the keyboard lock;
when the status bar icon is
When the E-load is in the working mode, press this key to select the
expected load modes.
Press this key to switch the interface between load, system
configuration, system parameter setting and loading the setting files.
In the working mode interface, adjust the cursor position and adjust
the loading value. Move the status bar position on another interface.
Trigger the E-load in specific working mode
Confirm the selected value or enter the setting menu.
Cancellation of operation or moving back to the top menu.
Loading or unloading the load.
4 basic working modes(CV/CC/CW/CR) shortcut keys.
11 digital keys and

2.4 LCD Status Bar Function

The following screen is ELP/DCH series E-oad LCD display interface.The status bar is
the top line icons. There are several icons on the status bar in the top line.
ET System electronic GmbH
, all other keys are invalid.
is backspace key
14