Chapter 2 Quick Start; Product Introduction; Features - Et system ELP/DCH Series User Manual

This chapter describes the power-on check procedure for the ELP/DCH Series load to
ensure that the E-load is properly started and used during initialization. It also
introduces the E-load front panel, rear panel, keyboard button functions and LCD
display function to ensure that you can quickly understand the appearance, structure
and button usage of the E-load before operating the E-load.

2.1 Product Introduction

With dynamic, automatic test, LED, List, OCP, EFFECT, battery and short and many other
test functions, ELP/DCH series E-load is mainly used for battery, AC-DC, DC-DC
modules, chargers and electronic components and other product performance testing. It
provides a best solution for design development and production line testing.
ELP/DCH series E-load supports RS232, RS485, and Ethernet communication interfaces
to fit your versatile solution and testing needs.

2.2 Features

1) 24-bit true color LCD display (liquid crystal display), GUI operation interface;
2) 500kHz synchronous sampling, 10Hz, 0.1mV/0.01mA stable resolution output;
3) Four basic function modes:
 CV constant voltage mode
 CC constant current mode
 CW constant power mode
 CR constant resistance mode
4) Multiple extended function modes:
LIST mode
ET System electronic GmbH

Chapter 2 Quick Start

11