Safety Information - 3M DBI SALA 5908549 User Instruction Manual

SAFETY INFORMATION

EN EN EN EN
Please read, understand, and follow all safety information contained in these
instructions, prior to the use of this product. FAILURE TO DO SO COULD RESULT IN
SERIOUS INJURY OR DEATH.
These instructions must be provided to the user of the equipment. Retain these
instructions for future reference.
Intended Use:
This product is used as part of a complete Fall Protection system.
Use in any other application including, but not limited to, material handling, recreational
or sports-related activities, or other activities not described in these instructions, is not
approved by 3M and could result in serious injury or death.
This product is only to be used by trained users in workplace applications.
!
WARNING
This product is used as part of a complete Fall Protection system. All users must be fully
trained in the safe installation and operation of their complete Fall Protection system.
Misuse of this product could result in serious injury or death. For proper selection,
operation, installation, maintenance, and service, refer to all instruction manuals and
manufacturer recommendations. For more information, see your supervisor or contact 3M
Technical Services.
To reduce the risks associated with using a Horizontal System which, if not
avoided, could result in serious injury or death:
- Inspect the product before each use and after any fall event, in accordance with
the procedures specified in these instructions.
- If inspection reveals an unsafe or defective condition, remove the product from
service immediately and clearly tag it "DO NOT USE". Destroy or repair the product
as required by these instructions.
- Any product that has been subject to fall arrest or impact force must be
immediately removed from service. Destroy or repair the product as required by
these instructions.
- Ensure that Fall Protection systems assembled from components made by different
manufacturers are compatible and meet all applicable Fall Protection regulations,
standards, or requirements. Always consult a Competent or Qualified Person before
using these systems.
- The product must only be installed as described in its instruction manuals.
Installations and use outside the scope of these instruction manuals must be
approved in writing by 3M.
- Before installing, ensure that the installation methods and the product will not
interfere with electric lines, gas lines, or other critical materials or systems.
- Ensure the product is configured and installed properly for safe operation as
described in these instructions.
- Do not exceed the number of allowable users specified in these instructions.
- Do not twist, tie, knot, or allow slack in the lifeline.
- Do not connect to the system while it is being transported or installed.
- Use caution when installing, using, or moving the product as moving parts may
create pinch points.
FORM NO: SIT 5908279
REV: B
2