Operation; Manual Mode; Review Scene Or Chase - Chauvet DMX-50A User Manual

Operation

M ANU AL M O D E
The manual mode allows direct control of all scanners. You are able to move them and change
attributes by using the channel faders and joystick.
Action
1) Press the AUTO DEL button repeatedly
until the MANUAL LED is lit.
2) Select a SCANNER button.
3) Move joystick and faders to change fixture
attributes.
PAGE/SELECT A/B button:
Use to switch between fader control of (A: Ch
1~8), (B: Ch 9~6) or both (A & B together)
TAP DISPLAY button:
Press to toggle the output indicator on the LCD
display between DMX values (0-255) and
percentage (0-100)
RE V I EW S C EN E O R C H AS E
This instruction assumes that you have already recorded scenes and chases on the controller. Other
wise skip section and go to programming.
Action
1) Select any one of the 30 banks by pressing
the BANK UP/DOWN buttons.
2) Select a SCENE button (1~8) to review.
3) Move joystick and faders to change fixture
attributes.
Action
1) Press any one of the 6 CHASE buttons.
2) Press the TAP DISPLAY button to view the
step number on the display.
3) Press the BANK UP/DOWN buttons review
all scenes in the chase.
DMX-50A User Manual
{SCENE Review}
{CHASE Review}
11
Operating Instructions
Notes
All changes made while in Manual Mode are
temporary and will not be recorded.
Notes
Make sure you are still in MANUAL Mode.
Revised: 2006-04-24 15:26:16