11
Configuring Infiniium Software for InfiniiMax Ultra Series Probe Amplifiers and Probe Heads
Source Estimate Option Availability
The Source Estimate option is available for the following combinations of probe
amplifiers, probe heads, orientation of probe head in the probing setup, and
measurement mode.
Probe Amplifiers
that Support
Source Estimate
•
•
•
•
•
Note: For InfiniiMode measurements, True View is the only available probe response option.
How to Change Probe Response Option
Option 1 - Use the button on the probe amplifier
Press the Probe Response button to switch
between the two probe response options.
The probe response selected using the Probe Response button gets automatically reflected in the
Infiniium GUI and vice versa.
140
Probe Heads that Support Source
Estimate
•
MX0020A
MX0100A Micro (60 mil and
135 mil)
MX0021A
•
MX0106A Differential Solder-in
MX0022A
•
N2839A Differential Browser
MX0024A
•
N5381B Differential Solder-in
MX0025A
•
N5425B ZIF Head all mm, all
degrees
•
N2851A Differential QuickTip
•
E2675B Diff Browser
•
E2676B Single Ended Browser
•
E2677B Solder In
•
E2678B Differential Solder In
•
E2679B Single Ended Solder In
•
N2887A Soft Touch
Probe Head
Orientation Needed
for Source Estimate
Vertical
Option 2 - Use the Infiniium software GUI
•
In the Probe Configuration dialog box, select
Differential Src Est as the measurement mode.
This sets Source Estimate as the probe
response for your amplifier.
•
For all other measurement modes, True View is
applicable.
InfiniiMax Ultra Series Probe Amplifiers & Probe Heads User's Guide
Measurement Mode
Needed for Source
Estimate
Differential Source
Estimate
(This measurement
mode can be used to
probe single-ended
or differential
signals)
See
page 144
to
know more.