Operating Modes - universalblue UAP1905-21 User Manual

5. OPERATING MODES

COOL MODE
 You can select it on the control panel or with the remote
control with the MODE option. The cool icon will light up on the
screen.
 Press the UP and DOWN buttons to increase / decrease the
temperature (from 17º to 30º).
 Press the FAN key to select the desired speed.
VENTILATION
 Select this mode with the device control panel or with the
remote control, using the MODE function. The fan icon will
then illuminate on the screen.
 Select
(High/Medium/Low).
 The temperature cannot be selected in this mode.
DEHUMIDIFIER MODE
 Select this mode via the device's control panel or with the
remote control with the MODE function. The dehumidifier icon
will then illuminate on the display.
 In this case, the speed cannot be adjusted and it will always
run at low speed by default.
 The temperature cannot be selected in this mode either.
 To drain the water, refer to the section "Water Draining
Methods".
HEAT MODE
 You can select it on the control panel or with the remote
control pressing the MODE option. The heat icon will light up
on the screen.
 Press the UP and DOWN buttons to increase / decrease the
temperature (from 17º to 30º).
 Press the FAN key to select the desired speed.
the desired speed with the FAN function
43