Table of Contents
Advertisement
Available languages
Available languages
METHOD OF TRANSMISSION
Point the remote control towards the air conditioning, and then
press the button on the controller. The instruction signal will
be transmitted to the air conditioner.
After receiving the signal from the remote control, the air
conditioner
acknowledgement sound.
WHEN USING THE REMOTE CONTROL, PLEASE NOTE
Do not place the remote control near high temperatures, such
as heaters, radiators or blankets or heating pads.
Do not place the remote control in direct sunlight or strong
lights.
Avoid accidentally dropping the remote control as this could
cause damage to it.
Do not place blocking objects between the air conditioner and
the remote control.
Do not splash the remote control with water or other liquids.
Do not place heavy objects on the controller.
If the remote control does not work, replace the batteries and
try again.
REPLACE BATTERIES
When the signal is transmitted but the air conditioning does not give
a confirmation signal, it means that the batteries have been
exhausted and need to be replaced.
Remove the battery cover and remove the used batteries by
removing the screw with a proper screwdriver and sliding the
cover in the direction of the arrow.
Replace the batteries with new ones paying attention to the "+"
and "-" poles.
Close the rear cover.
will
emit
a
beep
sound;
this
is
the
42
Advertisement
Table of Contents
