Do you have a question about the ENTITY and is the answer not in the manual?
Questions and answers
Jadav Kanakkumar
March 18, 2025
What is device ID how can use this function
1 comments:
Mr. Anderson
March 18, 2025
The Device ID function on the Trinity ENTITY is used for communication via the RS485 port. It allows the unit to be assigned an ID between 1 and 255 for communication purposes. To set the Device ID:
1. In Run Mode, press the PROG/ENTR key for 4 to 5 seconds until "CT Primary" appears. 2. Press the "UP" key until "Device ID" is displayed. 3. Press the PROG/ENTR key again, causing "P" to blink. 4. Adjust the parameter value using the "UP" and "DOWN" keys. 5. Press the PROG/ENTR key to confirm, which restarts the unit and returns it to Run Mode.
Need help?
Do you have a question about the ENTITY and is the answer not in the manual?
Questions and answers
What is device ID how can use this function
The Device ID function on the Trinity ENTITY is used for communication via the RS485 port. It allows the unit to be assigned an ID between 1 and 255 for communication purposes. To set the Device ID:
1. In Run Mode, press the PROG/ENTR key for 4 to 5 seconds until "CT Primary" appears.
2. Press the "UP" key until "Device ID" is displayed.
3. Press the PROG/ENTR key again, causing "P" to blink.
4. Adjust the parameter value using the "UP" and "DOWN" keys.
5. Press the PROG/ENTR key to confirm, which restarts the unit and returns it to Run Mode.
This answer is automatically generated