Table of Contents
Advertisement
Entity – Operational Manual
: ...........................................................................
P.O No.
: ...........................................................................
Customer
: ...........................................................................
Sr. No.
Routine
and
function
Specifications/Literature/O & M Manual.
Traceability: tested against latest "MTE" Standard Model PRS 1.3 having basic
accuracy of 0.02% traceable upto International Standards derived using appropriate
ratio techniques.
: ...........................................................................
Result of Test
: ...........................................................................
Remarks
: ...........................................................................
Test engineer
: ...........................................................................
Date
tests
conducted
to
[12]
relevant
standards
TRINITY
and
our
Advertisement
Table of Contents
Need help?
Do you have a question about the ENTITY and is the answer not in the manual?
Questions and answers
What is device ID how can use this function
The Device ID function on the Trinity ENTITY is used for communication via the RS485 port. It allows the unit to be assigned an ID between 1 and 255 for communication purposes. To set the Device ID:
1. In Run Mode, press the PROG/ENTR key for 4 to 5 seconds until "CT Primary" appears.
2. Press the "UP" key until "Device ID" is displayed.
3. Press the PROG/ENTR key again, causing "P" to blink.
4. Adjust the parameter value using the "UP" and "DOWN" keys.
5. Press the PROG/ENTR key to confirm, which restarts the unit and returns it to Run Mode.
This answer is automatically generated